How To Hang Your Tuscan Mirror Perfectly

Tuscan Mirrors are designed to make installation simple, accurate, and stress-free.
Every mirror arrives with:

✔️ A full-scale paper mounting template with pre-marked hole positions

✔️ Heavy-duty wall anchors

✔️ 2-inch screws for secure mounting

✔️ Built-in D-rings or keyhole hangers depending on the model

Follow this guide to get a flawless, level installation every time.

1. Unpack & Prepare Your Mirror

Before you begin:

• Carefully remove the protective packaging.
• Locate the paper template — this is a life-size outline of your exact mirror with the hanging points printed.
• Grab the provided anchors and screws.

Tools you’ll need:

• Tape measure
• Pencil
• Level
• Drill or screwdriver
• Painter’s tape

2. Choose the Perfect Height

Use these design standards:

• Above a vanity/console: bottom of the mirror 6–10 inches above the top.
• Hallway or entryway: center at 60–65 inches from the floor.
• Full-length mirrors: top at 72–78 inches minimum.

These heights create symmetry and a designer finish.

3. Position the Paper Template

This makes Tuscan Mirrors unique — no guessing, no measuring hole spacing.

1. Hold the template on the wall where you want the mirror.
2. Use painter’s tape on each corner to secure it.
3. Step back and double-check:

• Is it centered?
• Is it straight? (Use your level along the printed top line.)
• Is the height right?

Pro tip: Templates let you adjust the position without lifting the mirror a dozen times.

4. Mark & Drill

Once the template is perfectly placed:

1. Use a pencil to mark directly through the printed hole indicators.
2. Remove the template.
3. Drill your holes where you marked.

Wall types:

• Drywall: Use the included anchors before inserting screws.
• Stud: Skip anchors; screw directly into the stud for maximum strength.
• Brick/Concrete: Use masonry drill bit + included anchors.

5. Insert the Hardware

Now add your Tuscan Mirrors installation pieces:

• Tap in the anchors if you’re on drywall or concrete.
• Insert the 2-inch screws, but leave about ¼ inch of the screw head exposed — perfect for hooking into D-rings or keyholes.

Everything in your box is rated for the weight of the mirror.

6. Hang the Mirror

Lift the mirror carefully:

• If your model has D-rings, hook them onto the screw heads.
• If it has keyholes, align and slide down until locked in place.

Use your level one more time — the Tuscan template makes it extremely accurate, so minimal adjustment is needed.

7. Finishing Touches

• Add the included felt bumpers so the mirror sits flush and doesn’t scuff the wall.
• Clean any fingerprints with a microfiber cloth.
• Step back and enjoy your new statement piece.

Why Tuscan Mirrors Are Easier to Install

Your installation experience is smoother than generic mirrors because:

• You get a true-to-scale template, eliminating measurement mistakes.
• You get matching anchors + screws, no hardware store trip.
• The D-rings/keyholes are factory-aligned for a level hang.
• The entire process takes less than 10 minutes for most customers.